Tel  +49 (0) 661 22050
Fax +49 (0) 661 21842
E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Image 2.png
  • Image 3.png
  • Image 4.png
  • Image 5.png
  • Image 6.png

 

Anchorage Devices

 

Proven Technology.
Proven Safety.

A suitable anchorage device / anchorage point is a prerequisite for the use of personal fall protection systems. IKAR GmbH not only offers a selection of stop systems, but also professional assembly on request.tage.

 

 

Webbing Anchorage Sling

according to EN 795:2012 Typ B; CEN/TS 16415:2013; EN 354:20102

 

as a transportable sling and subsystem of a fall arrest system of personal protective equipment against falls from a height.

 

  • Sewn loop sling made from 28 mm polyester webbing
  • Fitted with a tubular web wear sleeve

 

Areas of use:

Industry, Scaffolding

Application:

Anchorage device for use in fall
restraint and fall arrest systems

   
Order No. Length Weight Datasheet Log book and instructions for use Declaration of conformity
45-IK AB 50 0,50 m 0,10 kg Download PDF Download PDF  
45-IK AB 100 1,00 m 0,20 kg  
45-IK AB 150 1,50 m 0,25 kg  
45-IK AB 200 2,00 m 0,30 kg  
 

 

 


 

Steel Cable Anchorage Sling

according to EN 795:2012 Typ B; CEN/TS 16415:2013; EN 354:2010

as a transportable sling and subsystem of a fall arrest system of personal protective equipment against falls from a height.

 
  • Swaged double ended loop sling
  • Ø 6 mm galvanized steel cable

 

Areas of use:

Industry, Scaffolding

Application:

Anchorage device for use in fall
restraint and fall arrest systems

   
Order No. Length Weight Datasheet Log book and instructions for use Declaration of conformity
45-IK AS 50 0,50 m 0,10 kg Download PDF Download PDF  
45-IK AS 100 1,00 m 0,20 kg  
45-IK AS 150 1,50 m 0,25 kg  
45-IK AS 200 2,00 m 0,30 kg  
   
 

 


 

AP-MAV

according to EN 795:2012 Typ B und CEN/TS 16415:2017

 

The mobile anchorage connector is intended for the creation of a suitable anchorage point on an IKAR kernmantle rope type KMS 105 and has been tested and approved for fall protection and rescue of a maximum of 2 people. 

  • Aluminium construction
  • Easy to use
  • Corrosion resistant coating
   
Order No. Weight Datasheet Log book and
instructions for use
Declaration of conformity
AP-MAV 0,17 kg Download PDF Download PDF  
   
 

 


 

Anchorage Beam Clamp

according to EN 795:2012 Typ B

 

Easily mountable and removable attachment point on standard steel structures.

  • Adjustable beam clamp
  • Aluminium alloy bar and haws
  • Nickel plated D ring
  • Spring loaded adjustable jaws with securing screws
  • Designed to fit 84 - 265 mm wide "I" Beams up to 23 mm thick
  • Minimum breaking load : 18 kN
   
Order No. Weight max. Load
41-TK 2,20 kg 1 Person
 

 


 

Mobile Door Truss

according to EN 795:2012 Typ B und CEN/TS 16415:2017

 

Easily mountable and removable anchorage device through clamp fastening for personal fall protection and rescue without damaging existing structures. 

  • Galvanised steel construction 50 x 50
  • Clamp size 590 – 1100 mm
  • Overall length 1410 mm
   
Order No. Weight max. Load
41-TA 10,20 kg 2 Persons
 

 


AP-Fix W

according to N 795:2012 Typ A; CEN/TS 16415:2013

Eyebolt point free with rotating ring eye

 

The AP-Fix W offers you an optimum of freedom of movement with a 360 ° eyelet. These on very limited working surfaces such as wind turbines, on large machines, in maintenance halls or in industrial production.

  • Free rotating ring eye
  • incl. Mounting material
   
Order No. Weight max. Load Datasheet Log book and
instructions for use
AP-Fix W 480 g 2 Persons Download PDF Download PDF
 
 

 


Anschlagpunkt AP-Fix

according to EN 795:2012 Typ A; CEN/TS 16415:2013

 
  • Eyebolt for anchoring in concrete with reactive and M16 threaded bolt,
  • Galvanised, total length approx. 125 mm
   
Order No. Weight max. Load Datasheet Log book and
instructions for use
AP-FIX 0,44 kg 2 Pers.   Download PDF

 


Anschlagpunkt AP-Fix S

according to EN 795:2012 Typ A; CEN/TS 16415:2013

 
  • Eyebolt for bolting to steel constructions with nut and washer, M16 threaded bolt, galvanized,
  • total length approx. 65 mm
   
Order No. Weight max. Load Datasheet Log book and
instructions for use
AP-FIX s 0,46 kg 2 Persons Download PDF Download PDF

 


Mobiler, drehbarer Anschlagpunkt MAP

according to EN 795:2012 Typ B; CEN/TS 16415:2017

 
  • 2 Person Anchorage eyebolt which is removable at the press of a button
  • Ø 24 mm sleeve for anchoring in concrete (MAP-H) with injection adhesive or for bolting to steel constructions (MAP-SH).
  • Components are made of rust-free stainless steel, sleeve length approx. 100 mm or long sleeve approx. 550 mm, M24 metric exterior sleeve thread.
  • Weight 300 g
   
Order No. Length Weight Sleeve versions Datasheet Log book and
instructions for use
Declaration of conformity
MAP-H 100 100 mm 0,30 kg Concrete Download PDF           Download PDF           Download PDF          
MAP-H 150 150 mm   Concrete
MAP-H 200 200 mm   Concrete
MAP-H 250 250 mm   Concrete
MAP-H 300 300 mm   Concrete
MAP-H 350 350 mm   Concrete
MAP-H 400 400 mm   Concrete
MAP-H 450 450 mm   Concrete
MAP-H 500 500 mm   Concrete
MAP-H 550 550 mm   Concrete
MAP-SH 150 150 mm   Steel:
 

 

 


Temporäres horizontal lifeline HLL

 

Shockabsorber HLL

according to 795:2012 Typ B/C

   

 

The IKAR temporary horizontal lifeline system is a tested and certified personal protective equipment against falling which is used in combination with IKAR height safety devices according to EN 360 or shock absorbing lanyards according to EN 355. The temporary lifeline systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable Anchorage Points. The HLL is equipped with an integrated switchable reverse lock, which facilitates the pretension of the lifeline system. The innovative tension indicator shows the user when the correct preload force is reached. A person who felt into the system can be lowered a maximum of 2 m.

  • Maximum span 12 m
  • System capacity of 1 Person
  • Rescue length up to 2 m
  • Pre-tension 1,0 kN
  • Steel cable Ø 6,0 mm

 

Areas of use:

Industry, Scaffolding, Construction

Application::

Attachment

 

 

     
 
Order No. Weight Suspension Datasheet Log book and
instructions for use
Declaration of Conformity
41-HLL 12/6 4,20 kg Swivel Download PDF Download PDF Download PDF
 

 Temporäres horizontal lifeline HAL

 

ABS 3a WH with pre-tension indicator

according to EN 341:2011/1A bzw. 1B; EN 1496:2017/A; EN 795:2012 Typ B/C

   

 

The IKAR descent device ABS 3a WH with integrated tension indicator is tested and certified as a temporary horizontal lifeline system which is used as personal protective equipment against falling in combination with IKAR height safety according to EN 360 or fasteners with shock absorber according to EN 355. The temporary lifeline systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable Anchorage Points. An integrated switchable reverse allows an easy pretension of the lifeline system. The innovative tension indicator shows the user when the correct preload force is reached. In addition, the IKAR HAL system presents itself as a descent device with hoisting facility. A person who has fallen into the system can be lowered a maximum of 100 m.

  • Maximum span 12 m
  • System capacity of 1 Person
  • Rescue length up to 100 m
  • Pre-tension 1,0 kN
  • Kernmantle rope Ø 10,5 mm

 

Areas of use:

Industry, Scaffolding, Construction

Application::

Attachment, Rescue


 

 

     
Order No. Weight Suspension Datasheet Log book and
instructions for use
Declaration of Conformity
41-HAL 12 3,20 kg Swivel Download PDF Download PDF Download PDF
 
Kernmantelseil
Order No. Weight Dimension Rope Suspension
Function
KMS 105-X 70 g/m Ø 10,5 mm till 20 m, carabiner on both sides Lowering descending
KMS 105 70 g/m Ø 10,5 mm additionally per metre Lowering descending
 
 

 

 


 

Carriage for Personal Fall Protection Devices

Certified as mobile anchorage device for personal safety devices in accordance with EN 795:2012 Type B

 

The IKAR carriage is a mobile anchorage point for securing one person to an existing construction. The existing construction should be able to withstand the forces in the direction of the load which arise in case of a fall (compliant with EN 795 verification by the technical construction regulations).

  • Corrosion-resistant V2A stainless steel design
  • Smooth-running design due to guide rollers with dual ball-bearings
  • Track clearance adjustable with eccentric bolts on the carriage for optimum play-free running performance
  • Low-noise running characteristics due to polyamide rollers
  • Follows automatically follows in a vertical position above the user
  • Impact bumpers mounted on both sides
  • Available for various IPE beam sizes (see table below)

 

 

 

   
Order No. Typ Beam Type max. Field Length Datasheet Log book and
instructions for use
Declaration of conformity
41-LW 100 LW 100 IPE 100 3.000 mm Download PDF Download PDF       Download PDF
41-LW 120 LW 120 IPE 120 4.000 mm Download PDF
41-LW 140 LW 140 IPE 140 4.000 mm Download PDF
41-LW 160 LW 160 IPE 160 6.000 mm Download PDF
41-LW 200 LW 200 IPE 200 8.000 mm Download PDF
41-LW 270 LW 270 IPE 270 10.000 mm Download PDF
41-LW 360 LW 360 IPE 360 15.000 mm Download PDF
 

 

 

 

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.